24-25 HELI

PHOTOCHROMIC X POLARIZED PINK

The lens combines "polarized lens" which reduces reflected light and makes uneven surfaces easier to see, with "photochromic lens" which change color in response to ultraviolet rays.

• 

  Photochromic lens is the unique technology to change the lens darkness depending on the UV rays. Automatically adjusts lens brightness in all weather conditions from snowfall, rainfall, and cloudy to fine weather. The lens color becomes darker as the amount of UV rays increases and lighter as the amount of UV rays decreases.

• 

  Reflected light from snow and water surfaces causes glare, making it difficult to see objects and increasing eye fatigue.
  Polarized lenses allow only natural light to pass through and block reflected light, which is the cause of glare, for clearer visibility.

"TBR" adopted model with removes humidity automatically by the electrical turbo fan and it prevent fogging.

The turbo fan model from electrical series it cumulated over 40 years of SWANS snow goggles technology.
The visibility is always clear by prevents dazzling light reflection with its Polarized function.
Photochromic lens is also adopted it lens tint changes automatically by amount of UV light.

• 

  The "TBR" is equipped that sense the humidity inside of the goggles and remove it by turning on the fan automatically.
  The battery box (AAA battery/sold separately) and the switch are integrated into the frame side. It makes the high-spec and smart design.
  You can operate the switch easily even wearing the glove.

• 

  The wide lens that expands the visibility and big frame structure provides glasses compatible.※It may not able to be used depending on the size or design of the glasses.

【Attention for AUTO mode using】

Our sensor turbo fan operates by responding to the inner of the goggle's humidity.
However, the sensor also responds to the indoor environment humidity.
Therefore, if you turn on the AUTO mode in a warm environment (the humidity is higher than cold place), the sensor is operated by an external factor, not a goggle's humidity and operated wrongly.
Please keep turning OFF the switch when you are not on the snow (also when storage).

The round sticker attached to the lens is an "APA (Atmospheric Pressure Regulator) filter", which is used to adjust the air pressure in the inner air layer of the double lens.
If this seal is removed, moisture may enter between the double lens and make it unusable, therefore, please do not use the lens without the seal.
If the seal is accidentally removed before use, be sure to attach this “APA (air pressure regulator) filter” to the lens before using the goggles.

• What is APA filter?