Proper maintenance and storage
Storing lenses with sweat, sebum, water, mud, etc. may cause damage to the lenses themselves. Please check your lenses for such contamination after every use.
If the lens is dirty
02. Rinse the frame and lens gently under running water by rubbing the frame and lens with your fingers.
Note: Do not wash the lens with hot water. It may cause damage to the lens.
03. Wipe the lens with a soft cloth to remove any moisture remaining on the lens.
04. Let it dry naturally.
How to maintain your winter goggles (video)
If the strap is dirty
01. Remove the strap from the frame.
Use water or warm water and wash them by hand..
02. Remove excess water with a dry towel and let them dry naturally enough.
Note: If the stains are severe, please wash the product by hand with diluted neutral detergent.
Caution on care and maintenance
• Do not use organic solvents (alcohol, thinner, etc.) or adhesives on the goggles as they may damage the product.
• If there is any dirt on the Claritex-coat (water-repellent) lens, wipe it off gently with a soft cloth or the cloth bag provided. Wiping with force may scratch the lens and degrade the water-repellent performance. If the lens is heavily soiled, rinse it with a diluted solution of neutral detergent and rinse it thoroughly with tap water. Do not use anti-fog or water-repellent solutions sold on the market on the Claritex-coat surface. The water-repellent performance will be degraded.
• The HEAT lens (surface heating lens) cannot be washed in water due to its structure. Washing with water may cause damage to the surface heating system. When cleaning the lens, gently wipe the lens surface with a wet, fluff-free soft cloth while the lens is still attached to the frame to remove any dirt, and then dry the lens thoroughly and naturally.
Storage Instructions
• Store in a place where it is not exposed to direct sunlight, avoiding high temperatures (above 50°C) and high humidity. (Examples of unsuitable places: near a heater, in a car in summer, in a drying room)
• Do not store the product under pressure even if it is stored in a case. Storing the product under pressure may deform the product. Especially for double lenses, it may cause the lenses to peel off, which may result in fogging between the lenses.
• Please do not allow any hard object to come in direct contact with the outside of the case during storage or when carrying the product.
