Proper maintenance and storage
Do not leave your swimming goggles without maintenance after use in the pool or ocean, as this may cause damage to the lenses and straps. Be sure to clean the swimming goggles after use.
If the lenses are dirty
01. Rinse under running water.
Note: Please be careful not to touch the inside of the lens. It will weaken the anti-fog effect!
02. Shake the goggles and drain the water well.
03. Gently wipe off any water remaining on the outside of the lens with a soft cloth.
04. Leave in the shade to dry naturally.
How to maintain the swimming goggles (video)
• If the lenses are dirty, rinse them with a cleaning solution made with diluted neutral detergent.
• Do not rub the swimming goggle lenses during the cleaning process.
• Rinse the lenses with tap water thoroughly after washing to avoid leaving any residual cleaning solution on the goggles.
Cautions on care and maintenance
• In the case of polarized lenses, the polarized film inserted between the lenses is very delicate and should not be left in water for long hours or use ultrasonic cleaners. It may cause damage to the lens. Please wipe off any water on the lens immediately after gently washing it under running water.
• Do not use organic solvents (alcohol, thinner, light-removing solution, etc.) or adhesives on goggles. It may cause damage to the product.
Cautions on Storage Methods
• Please keep the goggles in a goggle case if you have one, or if you do not have a case, please store the goggles in a place where the lenses will not be scratched.
• Store in a place away from direct sunlight, avoiding high temperatures (above 50°C) and high humidity. (Examples of unsuitable places: near a heater, in a car in summer, in a drying room)
• Do not leave the product with wet swimsuits or towels for long time, as mold and fungus may grow on them.
