Maintenance of Eye Guard

Proper maintenance and storage

Do not leave the lenses, frames, or straps with sweat, sebum, or water on them, as it may damage the lenses and cause stains or odors. Please check the product for such stains after use.

If the lens is dirty

01. Remove the strap from the frame.

02. Rinse the lens surface gently under running water by rubbing the lens surface with your finger.

Do not wash lenses in hot water. It may cause damage to the lenses.

03. Wipe the lens with a soft cloth to remove any remaining water.

04. Dry it naturally.

When the lens is dirty
• Rinse the lenses with a cleaning solution made with diluted neutral detergent if the lenses are dirty.
• Do not rub the lenses.
• Please rinse the lenses thoroughly with tap water to avoid residual cleaning solution on the lenses after washing.

When the strap is dirty

01. Remove the strap from the frame. Wash with cold water or warm water with your hand.

02. Remove any excess water with a dry towel and thoroughly allow to dry naturally.

Note: When the stains are even more serious, rinse with a diluted solution of neutral detergent and rinse thoroughly with tap water.

Cautions on Storage Methods

• Do not use organic solvents (alcohol, thinner, de-icer, etc.) or adhesives on the eye guard. It may cause damage to the product.

• GDS-001 and GDX-001 have antibacterial treatment on the cushions, but the effect is not permanent. The effect may decrease with use or washing in water.

Caution regarding storage

• Do not store in high temperatures (above 50°C) or high humidity, and keep out of direct sunlight. (Examples of unsuitable places: near a heater, inside a car in summer, in a drying room)


• Do not store the product under pressure even if it is stored in a case. Storing the product under pressure may cause deformation of the product.

• Do not allow hard objects to directly touch the outside of the case during storage or when carrying the product.

PAGETOP